Remote wireless Flash Trigger RF-603 II Nikon N1
-25%
Click Image for Gallery
Remote wireless Flash Trigger and shutter release RF-603 II for Nikon N1
Significant changes from the earlier RF-602:and RF-603
Transceiver can be set Off, or Transmit, or Receive.
Secure mounting ring for hotshoe
Increased synch speed .
Backwards-compatible with the RF-603, and can trigger the radio-enabled YN560-III flashgun
Use:
1. As a Wireless Shutter Release
1).Has the function of Auto-Focus, Continuous shooting, Long Exposure, Half-Way Pressing, Full-way Pressing
2).Press the transmitter button.
3) Cords supplied for Nikon N1 cameras
Nikon D800 D810 D700 D300s D300 D200
2. As a Wireless Flash Unit Trigger/receiver
1).Has the function of firing a flash speedlite.
Mount the transmitter on hot shoe of camera, connect the receiver with the flash speedlite, press shutter button half-way to wake up the flashgun at the same time, the green signal light will be blinking for seconds, and then full press shutter button.
2).One transmitter/receiver can trigger more than 2 receivers at the same time, so you can trigger more than 2 flashes at the same time.
.
3. As a Wireless Studio Flash Trigger
Using with a Studio Flash Sync Cable,
Technical Features:
Type FSK 2.4GHz wireless remote system
Transmitter Distance 100M
Channel 16 channels
Release Half-way press, Full-way Press
Like the RF-603, each unit is able to switch between acting as either a transmitter or receiver — there are no dedicated master or slave units. However the RF-603 II adds a toggle on the side with three positions: Off, TRX and TX. In TRX mode. The unit takes two AAA batteries.
Supplied with a tightening wheel and locking pin which should ensure the device stays put wherever you mount it.
Yongnuo has also increased the sync speed since the previous generation, raising it to 1/250–1/320 second,
Features flash wake-up for Canon and Nikon respectively.
Significant changes from the earlier RF-602:and RF-603
Transceiver can be set Off, or Transmit, or Receive.
Secure mounting ring for hotshoe
Increased synch speed .
Backwards-compatible with the RF-603, and can trigger the radio-enabled YN560-III flashgun
Use:
1. As a Wireless Shutter Release
1).Has the function of Auto-Focus, Continuous shooting, Long Exposure, Half-Way Pressing, Full-way Pressing
2).Press the transmitter button.
3) Cords supplied for Nikon N1 cameras
Nikon D800 D810 D700 D300s D300 D200
2. As a Wireless Flash Unit Trigger/receiver
1).Has the function of firing a flash speedlite.
Mount the transmitter on hot shoe of camera, connect the receiver with the flash speedlite, press shutter button half-way to wake up the flashgun at the same time, the green signal light will be blinking for seconds, and then full press shutter button.
2).One transmitter/receiver can trigger more than 2 receivers at the same time, so you can trigger more than 2 flashes at the same time.
.
3. As a Wireless Studio Flash Trigger
Using with a Studio Flash Sync Cable,
Technical Features:
Type FSK 2.4GHz wireless remote system
Transmitter Distance 100M
Channel 16 channels
Release Half-way press, Full-way Press
Like the RF-603, each unit is able to switch between acting as either a transmitter or receiver — there are no dedicated master or slave units. However the RF-603 II adds a toggle on the side with three positions: Off, TRX and TX. In TRX mode. The unit takes two AAA batteries.
Supplied with a tightening wheel and locking pin which should ensure the device stays put wherever you mount it.
Yongnuo has also increased the sync speed since the previous generation, raising it to 1/250–1/320 second,
Features flash wake-up for Canon and Nikon respectively.