Microphone for DSLR and video camcorders
Click Image for Gallery
Quality Affordable Entry Level Microphone for DSLR and video camcorders
Compatible with Phones that have 3.5mm audio in!
Model number: MIC-01 II
Material: Plastic
Size: 156*33*86mm
Weight: 81g
Monomer: Electrostatic Type Condenser Microphone
Channel: Mono
Frequency response: 50Hz-16kHz
Sensitivity Enhancement: +20dB ± 20dB
Level Noise level: 24 dB A
Directivity: Hypercardioid pointing
Effective pickup distance: 3 m
Output impedance: 200Ω ± 30% (at1kHz)
Maximum sound pressure level: 130dB (THD≤1.5% at 1KHz)
Sensitivity: -45dB ± 3dB (0dB = 1V / Pa at 1kHz)
Powered By: AAA 1.5V alkaline battery, Power consumption ≤ 5mA (typical)
Battery life: New battery can be used continuously for 70-80 hours
Features:
1. Strong compatibility, suitable for 3.5mm MIC audio interface.
2. Fits to standard cold shoe seat and 1/4'' screw mount.
3. Simple power supply. MIC-01 II microphone adopts a AAA 1.5V energy-saving and environmental protection battery, which can be bought anytime and anywhere.
4. Enhances the effect of microphone pickup. "+20dB" mode enhances the sensitivity and increases the microphone volume, extends the pickup range, making the audio recording effect is better and clearer.
5. Microphone have a spring cable, the length is 700mm, the line is placed in the front section, easy to operate.
Descriptions:
1. When the button is "OFF", it is not working. When the button is pushed to "0dB" and "+20dB", it belongs to the working state.
2. The indicator light is always green when the microphone is working. The battery should be replaced when the red light flashes.
3. Powered by a AAA battery, the MIC-01 II can work continuously for about 70-80 hours, and has a low voltage alarm prompt. (The actual continuous working hours may vary depending on the conditions of use.)
Package List:
1 × MIC-01 II Camera Recording Microphone(With 3.5mm Plug & 70cm Spring Cable)(Batteries not included)
1 × Windproof Cotton
1 × Instruction Manual
Compatible with Phones that have 3.5mm audio in!
Model number: MIC-01 II
Material: Plastic
Size: 156*33*86mm
Weight: 81g
Monomer: Electrostatic Type Condenser Microphone
Channel: Mono
Frequency response: 50Hz-16kHz
Sensitivity Enhancement: +20dB ± 20dB
Level Noise level: 24 dB A
Directivity: Hypercardioid pointing
Effective pickup distance: 3 m
Output impedance: 200Ω ± 30% (at1kHz)
Maximum sound pressure level: 130dB (THD≤1.5% at 1KHz)
Sensitivity: -45dB ± 3dB (0dB = 1V / Pa at 1kHz)
Powered By: AAA 1.5V alkaline battery, Power consumption ≤ 5mA (typical)
Battery life: New battery can be used continuously for 70-80 hours
Features:
1. Strong compatibility, suitable for 3.5mm MIC audio interface.
2. Fits to standard cold shoe seat and 1/4'' screw mount.
3. Simple power supply. MIC-01 II microphone adopts a AAA 1.5V energy-saving and environmental protection battery, which can be bought anytime and anywhere.
4. Enhances the effect of microphone pickup. "+20dB" mode enhances the sensitivity and increases the microphone volume, extends the pickup range, making the audio recording effect is better and clearer.
5. Microphone have a spring cable, the length is 700mm, the line is placed in the front section, easy to operate.
Descriptions:
1. When the button is "OFF", it is not working. When the button is pushed to "0dB" and "+20dB", it belongs to the working state.
2. The indicator light is always green when the microphone is working. The battery should be replaced when the red light flashes.
3. Powered by a AAA battery, the MIC-01 II can work continuously for about 70-80 hours, and has a low voltage alarm prompt. (The actual continuous working hours may vary depending on the conditions of use.)
Package List:
1 × MIC-01 II Camera Recording Microphone(With 3.5mm Plug & 70cm Spring Cable)(Batteries not included)
1 × Windproof Cotton
1 × Instruction Manual