Flash Bounce Diffuser for CANON Speedlite 320EX
Click Image for Gallery
Flash Bounce Diffuser for CANON Speedlite 320EX
The Omni Bounce Dome (Diffuser) for Canon 320EX Speedlight will diffuse the light output of the flash, producing softer shadows and a softer, more natural glow rather than the harsher effect when using a direct flash. The diffuser provides even coverage across the entire frame.
The lightweight, compact Bounce Dome simply slides onto and off the flash with custom fitting, without the need for touch fastener tabs.
Soft, even, diffused light from your shoe-mount flash
Ultra-wide angle of coverage
Attaches instantly without touch tabs
Lightweight and compact
Introduction
The diffuser is used to create exposures of even density over the entire surface of film. Use the diffuser by placing it flush against the front of the lens and exposing through it. The light that passes through the diffuser and on to the film will create an even density across the surface of the film.
Flash straight on if without our diffuser causes the light to go forward only and creates a harsh shadow behind the subject. The flash with our diffuser installed and tilted at 45 degrees gives a nice soft wrap around of light with a soft shadow behind the subject. This fits cleanly over the head of your existing flash, no need for cumbersome attachments, hooks. Try us and see the difference. It disperses the light over a wider area for a softer, more balanced and natural effect than you didn't use before.
It helps to reduce hard background shadows and eliminates the annoying red eye effect.
Suitable For:
CANON Speedlite 320EX Flashgun
The Omni Bounce Dome (Diffuser) for Canon 320EX Speedlight will diffuse the light output of the flash, producing softer shadows and a softer, more natural glow rather than the harsher effect when using a direct flash. The diffuser provides even coverage across the entire frame.
The lightweight, compact Bounce Dome simply slides onto and off the flash with custom fitting, without the need for touch fastener tabs.
Soft, even, diffused light from your shoe-mount flash
Ultra-wide angle of coverage
Attaches instantly without touch tabs
Lightweight and compact
Introduction
The diffuser is used to create exposures of even density over the entire surface of film. Use the diffuser by placing it flush against the front of the lens and exposing through it. The light that passes through the diffuser and on to the film will create an even density across the surface of the film.
Flash straight on if without our diffuser causes the light to go forward only and creates a harsh shadow behind the subject. The flash with our diffuser installed and tilted at 45 degrees gives a nice soft wrap around of light with a soft shadow behind the subject. This fits cleanly over the head of your existing flash, no need for cumbersome attachments, hooks. Try us and see the difference. It disperses the light over a wider area for a softer, more balanced and natural effect than you didn't use before.
It helps to reduce hard background shadows and eliminates the annoying red eye effect.
Suitable For:
CANON Speedlite 320EX Flashgun